FAQ

Art Files

We recommend saving as a PDF file. You may also send the file in the following types: JPG, JPEG, TIF, TIFF, EPS, and PNG.

We prefer that you send PDF with embedded or outlined fonts. PDF files are easier to handle and will likely speed up your turn-around. Remember to flatten your files before uploading.

For Roll Labels, we recommend designing:
• vector files (e.g. EPS or PDF)
• 300 DPI or higher
• use black (100% K)
• for fine lines and text smaller than 9pt, use black (100% K) only

Category: Art Files

Low resolution files may be printed as is or will be placed on hold until we receive new files, slowing your turn-around.

Nothing less than 300dpi for paper products. 100dpi for large banners and backdrops.

Category: Art Files

Rich black is an ink mixture of solid black, 100% K, with additional CMY ink values. This results in a darker tone than black ink alone. If you print black alone as 100% K, the resulting black may not be as dark as you might like.

We recommend using
C 60 M 40 Y 40 K 100
This will give you a deep, dark, rich black.

*Products that are printed with dye-sublimation (9oz Premium Polyester Banner, Flags, Table Covers, Fabric Tube Displays, etc.)
call for the following color values:
C 100 M 100 Y 100 K 100

Category: Art Files

If you send us an RGB file, there is a chance that a color shift may occur and you may not be satisfied with your job.

You should always start and finish your designs in CMYK color mode.

Category: Art Files

Bleed must extend past the cut-line and will be trimmed from the product during the final cutting phase. When the image is required to extend all the way to the edge, bleed is needed to ensure that once cut, the color goes to the edge of the paper.

Please keep all text at least 0.25″ inside the cut-line.

– The bleed for Standard Products is 0.125″.
– The bleed for Booklets and Presentation Folders is 0.25″.

Category: Art Files

Sign Materials

Coroplast, also called pp plate sheet (“Fluted Polypropylene Sheet”), is lightweight, non-toxic, waterproof, shockproof, long-lasting material that resists corrosion. Coroplast has the advantages of being waterproof and colorfast.

Coroplast is a brand name of corrugated plastic and a registered trademark of Coroplast, LLC, a member of the Inteplast Group of companies. It has become a generically used tradename today refer to all corrugated plastic as “coroplast”.

Category: Sign Materials

Load More